Introduction, Tutorial environment, Introduction tutorial environment – Grandstream Robin SmartView with Grandstream Configuration Guide User Manual
Page 3
Grandstream Networks, Inc. Robin Smart View IP Door System & Grandstream IP Multimedia Phones
Page 3 of 17
Configuration Guide
Last Update : 04/2013
INTRODUCTION
The purpose of this document is to provide basic configuration guidance for Robin Smart View IP Door System
& Grandstream IP Multimedia Phones GXV3140/GXV3175.
This guide is applicable to the following Grandstream IP Multimedia Phones (GXV3140 with firmware 1.0.7.76
or higher, GXV3175v1 with firmware 1.0.3.74 or higher and GXV3175v2 with firmware 1.0.1.46 or higher)
Be aware that different firmware revisions may have different web interface formats and functionality.
This guide is describing 2 basic scenarios:
1- Peer Robin SmartView IP Door System with a GXV3140 or GXV3175 (Single Peer)
2- Robin SmartView IP Door System with Grandstream GXV3140 or GXV3175 using a SIP server
T
UTORIAL
E
NVIRONMENT
For this tutorial, we will be using Grandstream IP Multimedia Phone GXV3175v2 with firmware 1.0.1.46 and
Grandstream IP Multimedia Phone GXV3140 with firmware 1.0.7.76.
GXV3175v2 IP is 192.168.50.102
GXV3140 IP is 192.168.50.129
Robin SmartView IP is 192.168.50.252
Note:
Make sure that devices are set to use Static IPs; otherwise, the communication cannot be established if
one of them changes its IP from original one. (This applies to First and Second scenario only)