Grandstream 2N Helios with Grandstream Configuration Guide - Manual (Page 5)

Grandstream Networks, Inc. 2N Helios IP Door System & Grandstream IP Multimedia Phones
Page 5 of 15
www.grandstream.com
Configuration Guide
Last Update : 04/2013
S TEP 1: 2N H ELIOS IP D OOR S YSTEM C ONFIGURATION
1- Access the web interface of your Helios
2- Go to Basic Settings > Phonebook
3- Select a contact which is mapped for one touch call (for example for button #1 on your
HeliosIP). You need to modify Phone number for this contact according to your peer telephone. In
our example, you can use either GXV3140 with IP 192.168.50.132 or GXV3175 with IP
192.168.50.199
Number value needs to be like sip: [email protected]
(x can be replaced by any letter(s) or digit(s))
4- Press Save to apply settings
5-
Go to Advanced Settings > SIP Settings and set the following settings as shown in next figure.
IP addresses should match your network plan (in our example: 192.168.50.x)
SIP registration > Enable registration should be set to No
User ID/Auth ID/Password can be set to any extension
Keep Other settings to default (refer to above figure)