Grandstream GXV3240 BroadWorks Xsi Directories and Call Logs Guide - Manual (Page 7)

GXV3240/3275 BroadWorks Xsi Directories and Call Logs Guide Page 6 of 17
BROADWORKS XSI DIRECTORY AND CALL LOGS
CONFIGURATION
BROADWORKS SERVER CONFIGURATION
The BroadWorks Xsi Directories and Call Logs configuration are completed by the BroadWorks server
administrator or service provider. End users should be given Xsp server URI and user credentials to
access the service.
GXV PHONE CONFIGURATION
1. Log in Web GUI and register the BroadWorks account on GXV phone.
2. Browse to Maintenance Broadsoft to set configuration for BroadWorks Xsi Directories and Call Logs
service:

Fill the BroadWorks XSP server address in the Server blank. If the BroadWorks Xsp server
requires to use the HTTPS, please add the header “https://” ahead of BroadWorks Xsp server URI.
For example, “
https://xsp1.iop1.broadworks.net ”.

Fill the XMPP port number in the Port blank. The default port number is 80. If the BroadWorks Xsp
server requires to use the HTTPS, please fill the HTTPS port number “443” in the blank.

Fill the BroadWorks Xsi credentials, enter the extension number into username field and fill the
User ID and Password fields with the corresponding BroadWorks credentials.

If users need to use the selected Directory or Call Log categories, please set the categories as
“Enabled”.

End user is able to rename each directory or call log category. If user types a string into the blank,
it will override the default name. For example, the Group Directory’s default name is “Group” if it
keeps blank. If the user fills “Grandstream” into the blank, the phone will display “Grandstream” for
the Group Directory.
The following figure shows an example of how to configure the Broadsoft Xsi Directories and Call Log
settings on the GXV3240/GXV3275 phones.