beautypg.com

Provisioning – Grandstream GXV3275 XML Phonebook Guide User Manual

Page 9

background image

GXV3275 XML Based Downloadable Phonebook Guide

Page 8 of 21

This specifies the path where the phone is going to download the XML phone book file. Since

download method is already specified in the previous selection, users do not have to provide this

information in the server path. The accepted format are as follows:

IP_address[:port]/dir

Hostname[:port]/dir

Examples:

192.168.40.10/XMLphonebookdir

192.168.40.10:443/XMLphonebookdir

service.mycompany.com/XML/phonebook

mycompany.com:8080/phonebook

Note:

1. If "[:port]" is not specified, port 80 will be used as default for HTTP and Port 69 will be used as

default for TFTP;

2. The GXV3275 will always look for the phone book file phonebook.xml for downloading if no file

name is specified in the server path. Users could also change the phone book name if desired. In

this case, the phone book file name needs to be specified in the server path. For example, if the

phone book file name is

GXV3275contacts.xml

and the server directory is

192.168.40.10/XML

, the

download server path should be

192.168.40.10/XML/GXV3275contacts.xml

.

Time Interval

This specifies the phone book automatic download time interval. The available intervals are 2 hour, 4

hour, 6 hour, 8 hour and 12 hour. If it's set to None, automatic download will be disabled.

After the above configuration, tap on "Save" to save the change. Users could tap on "Download Now" to

start the downloading process.

PROVISIONING

Users may also use the config file to provision the phone with the above XML phone book downloading

options. In this case, the GXV3275 needs to be rebooted and provisioned. The corresponding P values are

as shown below.

This manual is related to the following products: