beautypg.com

12 en – Grandstream GVR3550 Quick Installation Guide User Manual

Page 3

background image

1

2

EN

PRECAUTIONS:

OVERVIEW:

GVR3550 is a NVR device with high performance and large HDD capacity. It pro-

vides a set of unified remote monitor system solution for small and medium-sized

enterprises at low cost. It is equipped with HDD detection and management, net-

work configuration, alarm event list, remote/local quick search, integrated local

and remote preview, multiple screen display and alarm record. It also supports

quick operation using mouse, keyboard, remote controller and front panel buttons.

CHANGE OR MODIFICATIONS TO THIS PRODUCT NOT EXPRESSLY AP-

PROVED BY GRANDSTREAM NETWORKS, INC., OR PERATION OF THE

PRODUCT IN ANY WAY OTHER THAN AS DESCRIBED BY THIS GUIDE

COULD VOID THE FACTORY WARRANTY.
REPRODUCTION OR RETRANSMITTAL OF THE ENTIRE OR ANY PART OF

THIS DOCUMENT, IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR

PRINT, FOR ANY PURPOSE WITHOUT THE EXPRESS WRITTEN PERMIS-

SION FROM GRANDSTREAM NETWORKS, INC. IS NOT PERMITTED.

• Do not expose this device to temperatures outside the range of 0°C to +50°C

for operating or -20°C to +60°C for storage.

• Do not expose this device to environments outside of the following humidity

range: 10-90% RH (non-condensing).

• Do not install HDD while device is powered on.

• Do not power cycle the device during system bootup or firmware upgrade. It may

corrupt firmware and damage the device.

• Only use supplied power adapter. Other adapter may damage the product and

void the warranty.

• Please follow this guide before operating the device.

INSTALL THE HDD:

1. Install the supplied screws to the 4 holes on the bottom of the HDD loosely.

1 x Power Adapter

1 x Main Case

1 x Ethernet Cable

18 x HDD

Screws

1 x Quick Installation Guide

1 x Remote Controller

4 x SATA

Data Cable

2 x SATA

Power Cable

PACKAGE CONTENT:

2. Remove the 8 screws on back and side panel of the device then open the

cover panel.

4 x Mount Bracket

with 12 Screws

2 x Wire

Clamper