Grandstream XML Application Guide - Manual (Page 8)

FIRMWARE VERSION 1.0.5.15 XML BASED DOWNLOADABLE PHONEBOOK GUIDE Page 8 of 15
• Phone Book XML Server Path
This specifies the path where the phone is going to download the XML phone book file. The maximum
length is 256 characters. Since download method is already specified in the previous selection, users
do not have to provide this information in the server path. The accepted format are as follows:
IP_address[:port]/dir
Hostname[:port]/dir
Examples:
192.168.40.10/XMLphone bookdir
192.168.40.10:443/XMLphone bookdir
service.mycompany.com/XML/phone book
mycompany.com:8080/phone book
Note:
1. If "[:port]" is not specified, port 80 will be used as default for HTTP. Port 443 will be used as default
for HTTPS and Port 69 will be used as default for TFTP;
2. The GXP21xx/GXP14xx/GXP116x will always look for the phone book file phonebook.xml for
downloading. There is no need to specify the file name in the phone book XML server path. Users
only need specify the directory path where the phonebook.xml file is located.
• Phone Book Download Interval
This specifies the phone book automatic download interval (in minutes). The valid range is 0, and 5 to
720. If it's set to 0, automatic download will be disabled.
• Remove Manually-edited Entries on Download
If this option is set to "Yes", all the entries manually added from LCD or Web GUI will be automatically
removed when the XML phone book is downloaded to the phone. The default value is "Yes".
After the above configuration, click on "Save and Apply" in the web GUI page. The phone will download,
parse and display the XML phone book upon pressing the keypad MENU->Phone Book->Download
Phone Book XML.
PROVISIONING
Users may also use the config file to provision the phone with the above XML phone book downloading
options. In this case, the GXP21xx/GXP14xx/GXP116x needs to be rebooted and provisioned. The
corresponding P values are as shown below.