Grandstream GXP2130 User Guide - Manual (Page 17)

GXP2130/GXP2140/GXP2160 USER GUIDE Page 15 of 49
INSTALLATION
EQUIPMENT PACKAGING
Table 6: GXP2130/GXP2140/GXP2160 EQUIPMENT PACKAGING
Main Case Yes 1
Handset Yes 1
Phone Cord Yes 1
Power Adaptor Yes 1
Ethernet Cable Yes 1
Phone Stand Yes 1
Wall Mount Yes 1
Quick Start Guide Yes 1
CONNECTING YOUR PHONE
Table 7: GXP2130/GXP2140/GXP2160 CONNECTORS
Handset Port RJ9 handset connector port
Headset Port RJ9 headset connector port (supporting EHS with Plantronics headset)
USB Port USB port connecting a USB flash drive. (not on GXP2130 )
LAN Port 10/100/1000Mbps RJ-45 port connecting to Ethernet
PC Port 10/100/1000Mbps RJ-45 port connecting to PC
EXT Port RJ11 connector port to connect the GXP2200EXT Board(GXP2140)
Power Jack 12V DC Power connector port
To set up the GXP2130/GXP2140/GXP2160, follow the steps below:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the
router) using the Ethernet cable;
4. Connect the 12V DC output plug to the power jack on the phone; plug the power adapter into an
electrical outlet. If PoE switch is used in step 3, this step could be skipped;
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for
the date/time display to show up;