Gladiator GAWB0xMTZG Adjustable Height 4/6/8 ft. Maple Workbench User Manual
Page 5
5
Insert another spacer (P5) into the outer leg (P1) as shown.
The buttons/tabs in the spacers (P5) should nest inside the holes
provided in the outer leg (P1) as shown. Repeat for each leg.
2.
Insert one of the inner legs (P2) into the outer leg (P1) as shown.
3.
Align the adjustment holes in the inner leg (P2) with the
adjustment holes in outer leg assembly at the desired height of
the workbench.
4.
Insert a hex-head bolt (F18) and washer (F19), and secure with a
wing nut (F17). Be sure the hex-head bolt aligns with the hex-
shaped adjustment hole correctly. Repeat for each leg.
NOTE: To minimize multiple adjustments during assembly, make
sure the adjustment holes are aligned at the desired height for all
the legs.
P1
P1
P1
P1
P4
P3
P5
P5
P5
P1
P1
P1
P1
P1
P4
P3
P1
P1
P1
P1
P1
P4
P3
P2
P2
P2
P2
P2
P1
P1
P1
P1
P1
P4
P3
P2
P2
P2
P2