Care and maintenance – Dixon RAM 42 2005 User Manual
Page 48
CARE AND MAINTENANCE
48
DECK REMOVAL:
1. Remove mower deck drive belt. To relieve belt
tension, insert p/n 17422 link (at front of lift frame)
into tab. Move deck lift pedal into the highest cut
position and latch in place. As a safety precaution,
insert clevis pin in nearest hole at rear of foot pedal.
Belt can now be removed from mower deck pulley.
2. Remove front hanger pin.
3. Remove front L-Rods and remove nut and bolt from
rear chain hangers.
4. Slide deck from beneath chassis.
5. Reverse procedure to reinstall deck to chassis.
This manual is related to the following products: