Dodge 2008 PM Caliber - Manual (Page 98)

Phone and Network Status Indicators
If available on the radio and/or on a premium display
such as the instrument panel cluster, and supported by
your cell phone, the UConnect
௡ system will provide
notification to inform you of your phone and network
status when you are attempting to make a phone call
using UConnect
௡. The status is given for roaming, net-
work signal strength, phone battery strength, etc.
Dialing Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone
keypad and still use the UConnect
௡ system (while dial-
ing via the cell phone keypad, the user must exercise
caution and take precautionary safety measures). By
dialing a number with your paired Bluetooth
௡ cellular
phone, the audio will be played through your vehicle’s
audio system. The UConnect
௡ system will work the same
as if you dial the number using voice recognition.
NOTE: Certain brands of mobile phones do not send the
dial ring to the UConnect
௡ system to play it on the
vehicle audio system, so you will not hear it. Under this
situation, after successfully dialing a number the user
may feel that the call did not go through even though the
call is in progress. Once your call is answered, you will
hear the audio.
Mute/Un-Mute (Mute Off)
When you mute the UConnect
௡ system, you will still be
able to hear the conversation coming from the other
party, but the other party will not be able to hear you. In
order to mute the UConnect
௡ system:
• Press the “Voice Recognition” button.
• Following the beep, say ЉMute.Љ
In order to un-mute the UConnect ௡ system:
• Press the “Voice Recognition” button.
• Following the beep, say ЉMute off.Љ
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE