Genee World Genee Link - Manual (Page 9)

Calibration
Left click on the “LightPen II” icon in the task bar.
Select the Calibration.
For the pointer, place the tip on the center of the green target and press the button. For the light
pen, press the tip of the light pen on the center of the green target. The colour of the target should
change from green to black.
This calibration starts from the upper left hand corner to the bottom right hand corner then to a “Z”
shape in the middle of the screen.
The calibration is finished when all 13 targets turn black.
To ensure optimal precision, hold the light pen or pointer in the same direction during calibration.
5