Genee World GV-2100 Quick Start - Manual (Page 7)

Using the features
The visualisers have built-in functions that can be operated either from the control panel buttons or
from the remote control.
4
Button functions on the visualiser Button functions on the remote
POWER Control the visualiser On/Off
NEG Display negative image
MIRROR Reverse the image
LAMP Control the arm lights and
back light
FREEZE Freeze the image
XGA Projector type
B&W Add and remove colour
SPLIT Image Split function
D./S. Switch between static mode
and dynamic mode
TEXT Sharpen image
+
T/W
– Increase and decrease the
magnification
TITLE Freeze the top 1/8 of the
screen
FAR/NEAR Focus far or near
AUTO To auto adjust white balance
and auto focus
CCD/PC1/PC2 CCD/RGB input signal
selection
RED + / - Alter colour balance
BLUE + / - Alter colour balance
BRIGHT+ / - Adjust brightness of image
Remarks: Frz, Title, D./S. and Split
functions are only available on
PROJECTOR OUT port.
Power Press the button once to power
on the visualiser; press the button
again to power off the visualiser
Output visualiser Press the button, the RGB OUTPUT
signal button terminal outputs the visualiser
signal
Output computer Press the button, the RGB OUTPUT
signal button terminal outputs the computer
signal
Auto button Press the button to automatically
adjust white balance and focus
Light button Each time you press the button, the
lighting changes as below:
Zoom button Press the +
or
– button to zoom
in or zoom out
A
+
–
The body lights on
The slide holder back light on
All the lights off
s
s
s