Installing switchair – Geist SA2-003 User Manual
Page 2

Geist Americas
Geist Europe
Geist Asia
Geist DCiM
China
Hong Kong
800.432.3219
1.877.449.4150
+44 (0) 1823 275100
+86.755.86639505
+852 90361927
geistglobal.com
geistglobal.com
geisteurope.com
geistglobal.com
geistglobal.com
Installing SwitchAir
Step 3 Slide chassis into channel and attach to the front of the rack using customer provided cage nuts
and screws. Install customer provided power cable to power distribution unit.
Step 1 Install air channel to rack front using customer provided cage nuts and screws. Use the outside
holes on the channel to attach the channel to the rack. The inner holes will be used by the chassis attaching
to the rack. The rear of the channel doesn’t attach to the rack or switch.
Step 2 Attach the wiper to the chassis using two ea. 6-32 1/4 “ pan head screws. The wiper helps
channelize the cool air from the chassis to the switch intake fans.
Attach The Side Rail Using Customer Provided Cage Nuts and Screws.
Use the Outer Holes on The Channel to Connect to the Rack
Attach the wiper using two 6-32 ¼ Panhead Screws
Wiper
Slide Chassis with Wiper into Channel and Fasten to Rack Front Using Cage Nuts
and Screws. Plug Power Cord into Power Distribution Unit. Install Complete
Cage Nuts and Screws
10002501