Setting up: connections, Cut view of the gamut ”stripped wire terminal – GamuT RS3 User Manual
Page 9
The tweeter inputs:
The top terminal is the NEGATIVE input
and the second terminal from the
bottom is the POSITIVE input for the
tweeter
The woofer inputs:
The second terminal from the top is
the NEGATIVE input and the lowest
terminal is the POSITIVE input for the
woofer
Cable
Stripped wires
Terminal
base
Connection for
bananaplugs
Bridging
Plate & Nut
Terminal Main Nut
Pressure insert
When using a single pair of wires,
use the woofer negative input & the
tweeter positive input.
When using Bi-Wiring or Bi-Amping
(two pairs of wires or two amplifiers):
remove the two bridging plates.
Cut view of the
GamuT
”Stripped Wire
Terminal”
Setting up: Connections