El superiores, Product specifications – GamuT RS3 User Manual
Page 11
El Superiores
in general
Enclosure type: Impulse optimized Bass Reflex
Enclosure build: Laminated and Form pressed Solid wood over
multilayered Birch plywood.
Enclosure construction: Internal Bracing and pressure control
segments with externally machined groves for optimized cabinet
surface behaviour.
Enclosure Acoustics Internally: critically positioned & optimized
acoustic elements
Front cover: Acoustically invisible stainless steel rods & fabric coated
rubber strings, all screw assembled and adjusted by hand.
Driver separation: By acoustic elements only
Network: Impulse correct and resonance optimized NRLI.
Input terminals: GamuT machined Stainless steel, Brass and Gold
plated Copper terminals.
Connection options: Minimum loss bare wire connection, Spades or 4
mm Banana.
Separate connection for the tweeter and for the mid / woofer section
Internal wiring: GamuT “Worm Holes“ wires
The S9
Floor coupling: Solid Integrated stainless steel spike system,
resonance controlled.
Port Openings: 2 x Machined solid Brass in a Solid stainless steel
flange, optimized flow, anti resonance coupled to the enclosure.
Woofer: 3 x 10,5" dynamic optimized, solid wood reinforced and fluid
rubber damped cone structure
Midrange: 1 x 7" sliced cone, dynamic optimized GamuT Hand treated
cone structure.
Tweeter: 1,5" impulse and resonance optimized Double ring radiator,
with GamuT stainless steel wave guide
Network configuration: 3 - way, DC coupled midrange, baffle-
corrected for free in room placement
Impedance: 4 ohms nominal
Minimum impedance: 3,2 ohms at 250 Hz
Crossover point: 250 & 2250 Hz
Sensitivity: 89.0 dB/2.83V
Frequency response: 18Hz - 60 kHz
Dimensions: 1670mm (H) 320mm (W) 802mm (D)
Weight: 185 kg
Recommended amplifier for maximum performance : minimum
200W & maximum 800W into 4 ohms
Product Specifications