GamuT Phi3 MKII - Manual (Page 6)

6 Phi MKII User Manual
•
Phi3, Phi5 & Phi6 MKII Speakers
OPTIMIZING THE SOUND
Toe-in: Optimizing the tweeter character
You have chosen to setup using the “Regular” or
the “Narrow Room” setup. By adjusting the toe-in
the tweeter level and character can be optimized.
In a “perfect” acoustic environment our speakers are
designed to be listened to app 20-25 degrees off axis,
which corresponds to a normal setup with the speakers
close to pointing straight. By using toe-in the tweeter
will point more towards the listening position thereby
increasing its level, as the highest level from the
tweeter is obtained directly on axis.
In the Regular Setup, with the tweeter axis pointing
close to straight, use toe-in to increase the tweeter
levels, and use toe-out to decrease the tweeter levels
In the Narrow Room Setup, The tweeter axis is
toed-in to meet in front of the listening position.
To increase the tweeter levels toe-out the speakers,
and to decrease the tweeter levels toe-in the speakers.
Please note that the increase/decrease in toe when using
this solution is more critical compared to using the
wRegular setup, only a few degrees change of Toe will
cause a great change in subjective tweeter level.
6
M ® inenT User manual – M3, M5 & M7 Speakers
• Toe-in: Optimizing the tweeter character:
You have chosen to setup using the “Regular”
or the “Narrow Room” setup. By adjusting the
toe-in the tweeter level and character can be
optimized
• I n a “perfect” acoustic environment our
speakers are designed to be listened to app
20-25 degrees off axis, which corresponds
to a normal setup with the speakers close to
pointing straight. By using toe-in the tweeter
will point more towards the listening position
thereby increasing its level, as the highest level
from the tweeter is obtained directly on axis.
• In the Regular Setup, with the tweeter
axis pointing close to straight, use toe-in to
increase the tweeter levels, and use toe-out to
decrease the tweeter levels
• In the Narrow Room Setup, The tweeter
axis is toed-in to meet in front of the listening
position. To increase the tweeter levels toe-out
the speakers, and to decrease the tweeter
levels toe-in the speakers.
Please note that the increase/decrease in
toe when using this solution is more critical
compared to using the Regular setup, only a
few degrees change of Toe will cause a great
change in subjective tweeter level.
The optimized
listening position
Length /5
Width /7
Width /7
The optimized low
frequency speaker
location
Less high frequency;
more toe-in
More high frequency;
less toe-in / pointing
more directly to
the ear
The Narrow Room