GamuT Phi3 MKII - Manual (Page 3)

3 Phi MKII User Manual
•
Phi3, Phi5 & Phi6 MKII Speakers
Spike adjustment: The new Spike system is designed to
penetrate heavy carpeting, by using a sharply shaped
center Spike. The Spike is locked by the outer Knob.
Loosen the knob counter clockwise to allow adjustment
of the Spike. Use an Allen key (Unbrako), size 6 mm, to
adjust the spike. Adjust the spikes to have an even weight
distribution (same slight resistance when turning the key)
to eliminate movement of the speaker. When the Speaker
is positioned in its desired position turn the outer Knobs
Clockwise by hand, until they lock, to lock the spikes.
The newly designed proprietary GamuT Terminals are
made to allow the use of 3 different connections: 8mm
spades, 4 mm banana plugs or stripped wire. Connect
your speaker cable to the speaker before connecting to
the amplifier.
When using Banana plugs insert the plugs in the
center hole, make sure the fit is as tight as possible.
When using a Spade, loosen the desired terminal nut
and insert the spade between the terminal and the
bracket.
When using a stripped wire remove the terminal
nut and insert the stripped wire into it. Position the
stripped wire onto the conical part of the terminal
base and re-position the terminal nut onto the thread
and turn the nut until it locks the wire.
CONNECTIONS