GAMMA PROGRESSION Els STRINGING MACHINE (Issue 1 - March 2009) - Manual (Page 8)

7
MOUNTING THE FRAME
Securing the Frame Shoulder Clamps
Lock the shoulder supports in position by
turning the knob at the base clockwise.
Repeat the adjustment procedure for the
remaining support post.
Re-tighten all of the frame supports in the
same order as before.
Do not overtighten any of the supports as
racquet damage may occur.
The supports should be tightened to the
point where the racquet frame will not move
in the mounting system when the handle is grasped and attempts are made to move it. Should
any supports lose contact with the frame while stringing, they should be re-tightened.
Frame Shoulder Support Adjustment
Being sure the shoulder supports are free to
swivel in their mountings, simultaneously rotate
the shoulder support adjustment knobs clock-
wise until both shoulder supports gently and
squarely contact the frame.