GAMMA PROGRESSION 200 STRINGING MACHINE (Issue 1 - July 2010) - Manual (Page 9)

9
STRINGING THE FRAME
Clamping the String
Clamp the tensioned string to the next ad-
jacent string using the second string clamp.
Release the tensioned string by raising the
tension arm.
Repeat the procedure for all of the remaining
main strings and tie off following the racquet
manufacturers recommendations.
Finishing the String Job
Weave and tension the remaining cross
strings and tie off at the specified grommet
hole.
Remove the strung racquet from the reverse
order of mounting.
Starting the Cross Strings
Follow the manufacturer's recommended
stringing pattern for one or two piece string-
ing. This will determine the starting point for
the cross strings. Weave the first two cross
strings and pull tension and clamp the cross
strings to each other.