DeLonghi PACL90 - Manual (Page 8)

8
Operation
TURNING THE APPLIANCE ON
Plug the appliance into the socket.
Two lines appear on the display indicating that the appliance is
in standby.
You can control the appliance with the remote control (see page 10)
or with the control panel.
OPERATION WITH CONTROL PANEL
Press the ON/OFF button (A) (when turned on, the air conditioning unit
starts operating in the same mode as when it was turned off).
Press the MODE (B) button until the indicator light corresponding
to the required mode lights up:
Indicator light (C): air-conditioning mode
Indicator light (D): boost mode
Indicator light (E) : fan mode with air filtration
Indicator light (C-D-E) together: smart mode
AIR-CONDITIONING MODE
Ideal for hot humid weather when you need to cool and dehu-
midify the room.
To set the operation of the appliance correctly, press the + (H) or
- (M) buttons until the desired temperature is displayed.
Then select the fan speed by pressing the SPEED button (R) until
the indicator light corresponding to the required fan speed lights
up
MAX:
the air conditioning unit operates at maximum to reach
the required temperature as rapidly as possible
MED: reduces noise levels but still maintains a good level of
comfort
MIN: for silent operation
AUTO: the appliance automatically selects the most suitable
fan speed in relation to the temperature set on the digi-
tal display.
The most suitable temperature for the room during the summer
varies from 75° - 81° F (24 to 27°C).
You are recommended, however, not to set a temperature
excessively lower than the outside temperature.
78