FSR YUV-6 User Manual
Page 3
INTRODUCTION
The all new YUV-6 is a ultra high resolution, ultra high bandwidth,
one input by six outputs, distribution amplifier suitable for applications
requiring the highest possible video and audio quality
. The first two
outputs have independent cable equalization permitting long cable runs
while maintaining excellent signal integrity for even the highest video
resolutions.
Not only does this equipment have over 400 MHz of video bandwidth
but it also has the unique FSR advanced sychronizing circuitry to
ensure a rock stable video image at any resolution and signal level.
The first two outputs are independently equalized to maintain excellent
signal integrity for all video resolutions. Cable runs of up to 175 feet are
possible with 180 MHz of full amplitude bandwidth and +/- 0.75 dB
flatness to 130 Mhz.
A
0.2V P-P
input signal yields 316 MHz of
bandwidth and +/- 0.5 dB flatness to 250 MHz. This means that the
signal you feed into the YUV-6 will arrive at the far end of the cable
with an almost immeasurable amount of loss and no distortion due to
peaking effect
s
.
The digital audio input accepts DTS, AES/EBU as well as SP/DIF
signals with sampling rates up to 96 kHz.Extremely low jitter and sub
nano-second rise and fall times insure transparent audio signal
distribution.
The YUV-6 accepts and distributes RGBS, RGsB, RsGsBs,
component video, S-video, composite video, and digital audio on
75 Ohm female BNC connectors.
Even using standard 75 ohm BNC connectors the RGB-4 and 6 are
housed in a 1RU metal enclosure freeing up valuable rack space.
FSR also manufactures many other signal handling products that make
any video installation quick and professional.
F
E
A
TURES
•Minimum 400 MHz of bandwidth
• +/- 0.5 dB flatness to 300MHz
• Advanced sychronizing circuitry
• 75 Ohm BNC connectors for the input and each output
• Independent cable equalization control for the first two output channels
•Compatible with all RGB-HV
, HD
TV and DVD standards
• Internal universal power supply
TECHNICAL
SPECIFICA
TIONS
V
ideo Input
Number/T
ype:
1 RGBS (audio channel not used), RGsB, RsGsBs,
Component video, S-video, Composite video
Connectors:
3 or 4 female BNC (the fourth can be used for digital
audio instead of sync)
Impedance:
510 Ohms
Input Levels:
RGB
0.7V p-p
Y of component video 1V p-p
S-video 1V p-p
Composite video 1V p-p
R-Y
, B-Y
component video 0.3V p-p
C of S-video 0.3V p-p
Min/Max
Levels:
0.3V p-p to1.5V p-p with no of
fset
Horizontal
Frequency:
15kHz to 180kHz
V
ertical
Frequency:
15Hz to 170Hz
Differential phase error: 0.2 degrees at 3.58 MHz (NTSC), 4.43 MHz
(P
AL)
Dif
ferential
Gain
error:
0.1%at 3.58 MHz (NTSC), 4.43 MHz (P
AL)
V
ideo Output
Number/T
ype:
6 RGBS (audio channel not used), RGsB, RsGsBs,
Component video, S-video, Composite video
Connectors:
6 groups of 4 BNC
Impedance:
7
5
Ohms
Output Levels:
RGB 0.7V p-p
Y of component video 1V p-p
S-video 1V p-p
Composite video 1V p-p
R-Y
, B-Y
component video 0.3V p-p
C of S-video 0.3V p-p
Min/Max Levels: 0.3V p-p to1.5V p-p
DC
of
fset:
+/-20mV maximum with input at 0V of
fset
Sync
Input
Level:
Analog or TTL 0.5V to 5V p-p
Output Level:
5
V
into Hi -Z 2.4V into 75 Ohms
Input Impedance: 510 Ohms