FSR IT-A25-M70 - Manual (Page 4)

4
INSTALLATION AND OPERATION
Mount the units as appropriate for the particular installation.
There are #6-32` tapped holes on the top and bottom of the IT-A25
series housings for mounting. Use #6-32 screws that protrude through
no longer than 1/2". There are also rack kits available from FSR for
mounting in a standard 19” rack mount. See “accessories” section for
FSR part numbers and ordering information.
FRONT PANEL LED STATUS INDICATION
ON OFF STANDBY
On/Standby: Green indicates the
amplifi er is active.
Amber indicates the amplifi er is
powered, but in Standby mode
drawing minimal current.
CLIP
When lit this led indicates the
amplifi er is approaching the onset of
clipping.