Fronius Transceiver Card - Manual (Page 25)

11
EN-US
(1)
(3) (2)
Fig 5 Resetting Jumper Fig. 6 Resetting Connection
Option 2 (no connection via PC possible):
WARNING! An electrical shock can be fatal. Danger from mains voltage and
DC voltage from solar modules. The inverter connection area should only be
opened by a licensed electrician after being disconnected from the mains
power.
1. Open housing of wireless transceiver box or inverter with integrated wireless trans-
ceiver card
2. Secure power supply
3. Set jumper position 1 - 2 (1) to position 2 - 3 (2)
4. Press button (3) to reset the connection
5. Connection is broken and can now be re-established
6. Reset jumper to position 1-2 (1)
7. This resets the wireless transceiver to its factory settings and it can now be re-
connected to another wireless transceiver.
Breaking the
Wireless Trans-
ceiver Connec-
tion
(continued)