Fronius Transceiver Card - Manual (Page 18)

4
Application Area The Wireless transceiver card / box can be used for the following applications:
-
Datalogger card to PC (compatible with Datalogger Version 5.1.21 or higher)
- Public display card/box to large display
- Interface card to end device (e.g. PC)
- Interface card easy to end device (e.g. PC)
Device Concept The device comes in 2 versions (plug-in card and external box).
Important The Wireless transceiver card is used to connect to a DatCom card. The
Wireless transceiver box is used to connect to a DatCom box or other external device
(e.g. PC).
Wireless transceiver card:
The plug-in card is equipped with a RS232 interface used to connect to DatCom compo-
nents. Power is supplied via the pin contacts in the inverter. An external antenna is used
for the wireless connection.
Wireless transceiver box:
The box can be connected using either a USB or RS232 interface. When using USB,
power is supplied via the USB connection. For the RS232 interface, a power supply unit
is used. The box has an integrated antenna for the wireless connection.
Available wireless transmission sets:
Fig. 01 Wireless transceiver box to Wireless transceiver box
Fig. 02 Wireless transceiver card to Wireless transceiver box