beautypg.com

Dukane Projector 8783 User Manual

Page 7

background image

7

Setting up

WARNING ►Place the projector in a stable horizontal position. If the

projector falls or is knocked over it could cause injury and/or damage to the

projector. Using a damaged projector could then result in fire and/or electric

shock.

• Do not place the projector on an unstable, slanted or vibrational surface such

as a wobbly or inclined stand.

• Do not place the projector on its side, front or rear position.

• Consult with your dealer before a special installation such as suspending

from a ceiling or somewhere else.

►Place the projector in a cool place, and ensure that there is sufficient

ventilation. The high temperature of the projector could cause fire, burns and/

or malfunction of the projector.

• Do not stop-up, block or otherwise cover the projector's vents.

• Keep a space of 30 cm or more between the sides of the projector and other

objects such as walls.

• Do not place the projector on metallic thing or anything weak in heat.

• Do not place the projector on carpet, cushions or bedding.

• Do not place the projector in direct sunlight or near hot objects such as

heaters.

• Do not anything near the projector lens or vents, or on top of the projector.

• Do not place anything that may be sucked into or stick to the vents on the

bottom of the projector. This projector has some intake vents also on the

bottom.

►Do not place the projector anyplace where it may get wet. Getting the

projector wet or inserting liquid into the projector could cause fire, electric

shock and/or malfunction of the projector.

• Do not place the projector in a bathroom or the outdoors.

• Do not place anything containing liquid near the projector.

CAUTION ►Avoid placing the projector in smoky, humid or dusty place.

Placing the projector in such places could cause fire, electric shock and/or

malfunction of the projector.
• Do not place the projector near humidifiers, smoking spaces or a kitchen.

►Position the projector to prevent light from directly hitting the projector's

remote sensor.

Arrangement (continued)