Dukane Projector 8783 - Manual (Page 14)

4
Operating
Temporarily muting the sound
1.
Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the
sound.
To restore the sound, press the MUTE, VOLUME + or VOLUME - button.
Even if you do not do anything, the dialog will automatically disappear
after a few seconds.
● When is selected for the AUDIO item of the AUDIO menu (32),
the volume adjustment is disabled.
● When is selected to VIDEO (NTSC), S-VIDEO (NTSC) or
COMPONENT (525i (480i)) port, the C.C. (Closed Caption) is automatically activated if
the C.C. is set to AUTO in the DISPLAY of the C.C. menu and the input signal from the
port supports the C.C. feature (51).
1.
Press the COMPUTER button on the remote control.
Each time you press the button, the projector switches its
input port as below.
COMPUTER IN1  COMPUTER IN2  HDMI
● If the COMPUTER button is pushed to switch from a signal from the
VIDEO or S-VIDEO port, when TURN ON is selected for the AUTO
SEARCH item in the OPTION menu (38), the projector will check the
COMPUTER IN1 port first. If no input is detected at the port, the projector
will check other port in above order.
(continued on next page)
INPUT/ENTER
MENU
LAMP
TEMP
POWER
STANDBY/ON
INPUT/
ENTER
Selecting an input signal
1.
Press the INPUT/ENTER button on the projector.
Each time you press the button, the projector switches its
input port as below.
COMPUTER IN1  COMPUTER IN2
VIDEO

S-VIDEO

HDMI
COMPUTER button
VOLUME +/- button
MUTE button
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
Operating
Adjusting the volume
1.
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the volume.
If you do not do anything, the dialog will automatically disappear after
a few seconds.
● When is selected for the AUDIO item of the AUDIO menu (32),
the volume adjustment is disabled.
● When the projector is in the standby mode, the volume can be adjusted
if is not selected for the AUDIO OUT STANDBY of AUDIO (35).
● When the AUDIO OUT port connected with a external speaker, the
built-in speaker is disabled.