D-Link DCM-202 - Manual (Page 5)

8 9
Product Specifications
Dimensions: 142 x 120 x 30mm
5.6 x 4.7 x 1.2in
Net Weight: 345g +/- 10g (0.76lb)
DC Input Voltage: 12VDC/1A
Power Dissipation (Max): 8 Watts
Operating Temperature: O
° C ~ 40 ° C
32 ° C ~ 104 ° F
Operating Humidity: 10%~90%
Cable Network Interface: F Type RF Connector
LAN Access Point: 10/100 Mbps Ethernet MAC
USB Interface (Max): 11Mbps
DOWNSTREAM transmission speed (MAX): 38Mbps
UPSTREAM transmission speed (MAX): 30Mbps
Back Panel Interface
• RESET - Restores factory default settings.
• Power - Socket to connect the power adapter included in the product package.
• ETH - RJ-45 female socket for connection of the Ethernet cable.
• USB - USB “B” -type socket. Connects through USB cable to a computer’s
USB “A” -type port.
• CATV - RF connector to attach the cable for broadband Internet access.
Appendix
After installation is complete, the cable modem is operating properly if the
P
P P P Po o o o ow w w w wer er er er er, Cable Cable Cable Cable Cable, and Status Status Status Status Status LED lights are solid green.
Check the LEDs
LED LABEL COLOR DESCRIPTION
Green
Orange-
Blinking
Orange
Green
Green-Blinking
Green
Green-Blinking
Green
Green
Green-Blinking
Power
Cable
Status
ETH
USB
Cable modem is plugged in to an electrical outlet
and is receiving power
The modem is searching for the DOWNSTREAM
frequency
DOWNSTREAM frequency is locked. Searching
for UPSTREAM frequency
UPSTREAM frequency is locked
Modem is registering with the cable company’s
head-end
Modem is ready for data transfers
Valid Ethernet link status
Cable modem is transmitting/receiving data
through the Ethernet port
USB interface is connected
Data is being sent/received through the USB port