Smart bios – Foxconn G41MXP User Manual

Page 36

Smart bIoS

► Smart Power LED

Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.

► Smart Boot Menu

When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function. This also pre-
vents user without password trying to get into your computer through smart boot menu.

► Current CPU Speed

This item displays the current CPU speed.

► Current FSB Speed

This item displays the current Front Side Bus clock.

► Current CPU Multiplier

This item displays the current CPU Ratio.

► Current DRAM Speed

This item displays the current DRAM Speed.

System Status

Power LED Status

Stop Blinking Condition

Normal

Always On

No Memory

Continue blinking On (1sec.), Off (1sec.)

Reboot & Memory OK

No Display

Continue blinking On (2sec.), Off (2sec.)

Reboot & Display OK

Post Error Message

Quick blinking twice (1/3sec. On, 1/3sec. Off),

one long On (1sec.), continuously.

Enter Setup or Skip

No CPU Fan

Continue blinking On (1/2sec.), Off (1/2sec.)

Reboot & Fan OK

Smart BIOS

Smart Power LED

[Enabled]

Help Item

Smart Boot Menu

[Enabled]

Current CPU Speed

: 2.50GHz

Current FSB Speed

: 1333MHz

Current CPU Multiplier

: 7.5

Disabled

Current DRAM Speed

: 800MHz

Enabled

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

Options

[Enabled]