Foxconn G41MXP - Manual (Page 26)

19
2
19
Over Memory Frequency Jumper: MEM_OC_1333
When you use the memory which supports 1333/1066, the jumper is used to overclock
memory frequency, and make the memory work at 1333MHz.
Set the jumper to pins2-3 (Status1), memory frequency will be 1066MHz. This is default
status. Set the jumper to pins 1-2 (Status2), memory frequency will be up to 1333 MHz.
1
2
3
1
2
3
Status 1
(Default)
Status 2
MEM_OC_1333
■ To overclock memory up to 1333MHz, you also need to use CPU which supports
1333.
■ As a result of the memory brand and the chip’s difference, we do not guarantee that
the 1066MHz memory you used all can work steadily under 1333MHz.
CA
UT
IO
N
!