Foxconn G41AP - Manual (Page 25)

18
2
18
Over Memory Frequency Jumper: OC_MEM_1333
When you use 1333MHz/1066MHz memory, the jumper can make the memory work in the 1333MHz
frequency.
By default, set the JP pins 2 to 3(as Status1), the memory frequency is 1066MHz; when you set JP
pins 1 to 2(as Status2), the memory frequency is 1333MHz.
Status2
1
2
3
Status1
(default)
1
2
3
OC_MEM
Because the memory brand and the used chipset are different, we do not guarantee that
your 1066MHz memory can steadily work in the 1333MHz frequency.
CA
UT
IO
N
!