Clear cmos jumper, Cpu model selection jumper – Foxconn 6514MR-ES User Manual

Page 4

You can clear CMOS to restore default system setting. To clear the CMOS, follow

the procedures described below.

1. Turn off the system and unplug the AC power.

2. Remove ATX power cable from PWR1 connector.

3. Short pins 1 and 2 on the jumper.

4. Return the jumper to the normal setting by locking pin 2 and 3 together with the

jumper cap.

5. Turn the system on. The BIOS is returned to the default settings.

1. Clear CMOS Jumper

Normal (default)

Clear CMOS

Clear CMOS Jumper

The default status for VRM9-EN1 is open, which supports the Prescott and

Northwood CPU. If the jumper set as closed, then it supports the Willamette

CPU.

2. CPU Model Selection Jumper

1 2

Open

(default)

Closed

1 2

VRM9-EN1