Foxconn P55A Series User Manual

Page 43

► HPET

HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows
does not have access to it and therefore falls back to less accurate timing methods. This item
is used to enable or disable the HPET Support.

► ACPI Suspend Type

This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.

► USB Device Wakeup From S3/S4

This item is used to set the system to wake up by USB devices when it is staying at S3/S4
state.

► Resume by PCIE PME

This item is used to enable/disable the PCI Express device to generate a wake up.

► Resume by PCI Card

This item is used to enable/disable the PCI card and mouse to generate a wake up.

► Resume by PS2 Keyboard

This item is used to enable/disable the PS2 keyboard to generate a wake up.

► Resume by PS2 Mouse

This item is used to enable/disable the PS2 mouse to generate a wake up.

► Resume by RTC

This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.

► RTC Alarm Date(Days)

When Resume by RTC is enabled, select a specific date to generate a wake up.

► RTC Alarm Time (HH : MM : SS)

When Resume by RTC is enabled, select a specific time to generate a wake up.