Integrated peripherals, Ide configuration – Foxconn H55A User Manual
Page 40
3
33
Integrated Peripherals
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration
Press
IDE Configuration
► Configure SATA as
This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can
configure the SATA ports to support IDE mode.
► IDE Detect Time Out
This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking
time is over the set value, the system will skip it.
► Marvell 6121 PATA and eSATA
This item is used to enable or disabled the IDE devices and eSATA.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
IDE Configuration
Configure SATA as
[IDE]
Help Item
IDE Detect Time Out
[35]
Marvell 6121 PATA and eSATA
[Enabled]
IDE
Disabled
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[IDE]
Options
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Integrated Peripherals
► IDE Configuration
[Press Enter]
Help Item
► OnBoard Configuration
[Press Enter]
► SuperIO Configuration
[Press Enter]
Configure the IDE
► USB Configuration
[Press Enter]
Device(s).
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]