Integrated peripherals, Ide configuration – Foxconn H55M-S User Manual
Page 40
3
33
Integrated Peripherals
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
Integrated Peripherals
► IDE Configuration
[Press Enter]
Help Item
► OnBoard Configuration
[Press Enter]
► SuperIO Configuration
[Press Enter]
Configure the IDE
► USB Configuration
[Press Enter]
Device(s).
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration
Press
IDE Configuration
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
IDE Configuration
Configure SATA as
[IDE]
Help Item
SATA#1 IDE Configuration [Enhanced]
SATA#2 IDE Configuration
[Enhanced]
IDE Detect Time Out
[35]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[IDE]
Options
► Configure SATA as
This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can
configure the SATA ports to support IDE mode.
► SATA#1 IDE Configuration
SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the mode
of the SATA ports. Setting values are: [Compatible], [Enhanced].
► SATA#2 IDE Configuration
SATA#2 are the SATA ports 5,6 of the motherboard. This item allows you select the mode of
the SATA ports. Setting values are: [Disabled], [Enhanced].