beautypg.com

Chipset performance tuning – Foxconn Z68A-S User Manual

Page 35

background image

3

28

Chipset Performance Tuning

► Memory Multiplier

This item is used to adjust the memory Clock Ratio. The available settimgs are: [Auto], [10.67 .],
[13.33], [16], [18.67], [21.33].

► CAS# Latency (tCL)

The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-
ed depends on the memory clock frequency. The value that BIOS programs into the memory
controller is a function of the target clock frequency. The target clock frequency is determined
from the supported CAS latencies at given clock frequencies of each DIMM.

► Row Precharge Time (tRP)

This item allows you to select the row precharge time (in clock cycles).

► RAS# to CAS# Delay (tRCD)

This item allows you to select a delay time (in clock cycles) between the CAS# and RAS#
strobe signals.

► RAS# Active Time (tRAS)

This item allows you to set the minimum RAS# active time (in clock cycles).

► Write Recovery Time (tWR)

This item allows you to select the write recovery time (in clock cycles).

► Row Refresh Cycle Time (tRFC)

Refresh to Refresh or Refresh to Active command interval.

► Write to Read Delay (tWTR)

This item allows you to select a delay time (in clock cycles) between sending the last data from
a write operation to the memory and issuing a read command.

► Active-to-Active Delay (tRRD)

This item allows you to select a delay time (in clock cycles) between the RAS# and RAS#
strobe signals.


Memory Multiplier Configuration

Memory Multiplier [13.33]


Memory Timing Configuration

CAS# Latency(tCL) 9
Row Precharge Time(tRP) 9
RAS# to CAS# Delay(tRCD) 9
RAS# Active Time(tRAS) 24
Write Recovery Time(tWR) 10
Row Refresh Cycle Time(tRFC) 74
Write to Read Delay(tWTR) 5
Active to Active Delay(tRRD) 4
Read CAS# Precharege(tRTP) 5
Four Active Window Delay(tFAW) 20

Intel Graphics Configuration

Graphics Core Ratio Limit 22
Graphics Voltage(1/10000) 0

→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values

F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Memory Multiplier

Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced

This manual is related to the following products: