Foxconn H77M Series User Manual
Page 88
5
81
7. In “
Capacity” item, use the default value, and press
hard disk 74.5GB is becoming the default value, and it indicates the maximum
capacity.
8. Select “
Create Volume” and press
Press
1. Create RAID Volume
4. Recover Volume Options
2. Delete RAID Volume
5. Acceleration Options
3. Reset Disks to Non-RAID
6. Exit
RAID Volume :
None Defined.
Physical Devices:
ID
Device Model
Serial #
Size Type/Status(Vol ID)
0
ST3320418AS
9VM8Y4D8
298.0GB
Non-RAID Disk
1
ST3160815AS
5RX4M04N
149.0GB
Non-RAID Disk
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[
DISK/VOLUME INFORMATION
]
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
[
MAIN MENU
]
1. Create RAID Volume
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume ? (Y/N) :
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
The default value indicates the maximum capacity using the selected
disks. Entering a lower capacity allows you to create a second
volume on these disks
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
TryRAID1
RAID1(Mirror)
Select Disks
N/A
74.5 GB
N/A
Create Volume
[↑↓]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
[
HELP
]
74.5
[
CREATE VOLUME MENU
]