Foxconn H81MXV Series - Manual (Page 40)

exit
► Save Changes and Exit
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to save your changes and reset computer, select [No] or to return to the
main menu.
► Discard Changes and Exit
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to exit setup utility and reset computer without saving your modifications, select
[No] or to return to the main menu.
► Restore Optimized Defaults
Optimal defaults are the best settings of this motherboard.
Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults.
Select and then press to load the defaults. Select and press , it
will not load.
By this default, BIOS have set the optimal performance parameters of system to improve
the performances of system components. But if the optimal performance parameters to be
set cannot be supported by your hardware devices (for example, too many expansion cards
were installed), the system might fail to work.
► Boot Override
BIOS auto detect the presence of connected devices, select the device you want to boot
from and press , then the system will directly boot from the selected devices.
Version 2.15.1236. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main Chipset Advanced Boot Power Health Security Exit
Save Changes and Exit
Discard Changes and Exit
Load Optimized Defaults
Boot Override
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Reset the system after saving
the changes.
Exit
BIOS SETUP
33