Foxconn D70S Series - Manual (Page 55)

CD INSTRUCTION
48
5. Voltage Page - Voltage Control (Optional)
This page lets you set CPU voltage, memory voltage and North Bridge voltage manually. CPU
voltage can be stepped up/down by a unit of 12.5mV, while memory is 0.05V/step, and North
Bridge is 0.04V/step.
6. fan Page - fan Control
This page lets you enable Smart Fan function or set the fan speed by manual.
When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
Go to Voltage page
Select the option
you want to set
Adjust by manual
Reset the changes Apply the changes
Go to Fan page
Set fan speed by
dragging the lever
Enable or disable
smart fan function
Apply the changes