Foxconn A55M User Manual

Page 100

2. Select a RAID array for use (also can refer to section 5-3)

After rebooting your computer, you will see the RAID software prompting you to
press [Ctrl-F].
Press [Ctrl-F] to enter the Option ROM Utility and configure the mirrored RAID array
as described in the 5-3 section. Finally, you can reach this step as depicted.

3. Exit Option ROM Utility and restart computer to go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".

Use driver CD and click on "AMD RAID Driver" to install the AMD RAID driver. The
RAID driver will be installed only when you select "RAID" in "OnChip SATA Type"
setting. If you do not select RAID, then RAID driver will not be installed.

LD No RAID Mode Drv Capacity(GB) Status

LD 1

RAID 0

249.99 Functional

[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Ctrl+C] Define LD

[Enter] View LD [Ctrl+V] View Single Disk [ESC] Exit

[ Define LD Menu ]

[ Keys Available ]

[ LD View Menu ]

LD 1

RAID 1 2 249.99 Functional

This manual is related to the following products:

A75M