Foxconn A88GA - Manual (Page 47)

3
40
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches “Start
PWM Temperature” value.
► Slope PWM Value
It is used to set a slope value in PWM/Temperature diagram. The PWM value is subject to the
temperature input value by linear changing.
BIOS Security Features
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.
Load Optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after
updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults.
Select and then press to load the defaults. Select and press , it
will not load.
By this default, BIOS have set the optimal performance parameters
of system to improve the performances of system components. But if
the optimal performance parameters to be set cannot be supported by
your hardware devices (for example, too many expansion cards were
installed), the system might fail to work.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
BIOS Security Features
Scurity Settings Help Item
Supervisor Password : Not Installed Enter or change the
User Password : Not Installed password.
Change Supervisor Password [Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
Enter New Password :
Load Optimal Defaults?
[OK] [Cancel] [OK]