Foxconn A88GA - Manual (Page 41)

3
34
DRAM Timing Configuration
► DRAM Timing Mode
When both DCTs (DRAM controller) are enabled in unganged mode, BIOS must initialize
the frequency of each DCT in order, you also can configure the timings manually.
Settings are : [Auto], [DCT 0], [DCT 1], [Both].
Integrated Peripherals
► IDE Configuration / USB Configuration
Press to go to relative submenu.
► OnBoard LAN
This item is used to enable or disable the onboard LAN controller.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
DRAM Timing Configuration
DRAM Timing Configuration Help Item
DRAM Timing Mode
Auto
DCT 0
DCT 1
Both
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Auto] Options [Auto]
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
► IDE Configuration [Press Enter] Help Item
► USB Configuration [Press Enter]
OnBoard LAN [Enabled] Configure the IDE
OnBoard LAN Boot ROM [Disabled] device(s).
HD Audio Controller [Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]