Foxconn CK804K8MA-KS - Manual (Page 19)

11
Chapter 2 Installation Instructions
CK804K8MA Series User Manual
Note:
Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Installation of DDR Memory
1. There is only one gap in the center of the DIMM slot, and the memory module
can be fixed in one direction only.
2. Align the memory module to the DIMM slot, and insert the module verti-
cally into the DIMM slot.
Memory
This motherboard includes two 184-pin slots with 266/333/400 MHz Dual Chan-
nel DDR DRAM interface, You must install at least one memory module to
ensure normal operation and install to DIMM1 at first. If you install two modules,
they must be the same speed. Mixing memory modules from different manu-
factures are not recommended.
CK804K8MA-manual-V1.0-111704.p65 2004-11-19, 14:51 11