Foxconn K7S741GXMG-6L - Manual (Page 4)

4
You can clear CMOS to restore default system setting. To clear the CMOS, follow
the procedures described below.
1. Turn off the AC power supply and connect pin 1 and 2 together using the jumper
cap .
2. Return the jumper setting to normal (pin2 and 3 together with the jumper cap).
3. Turn the AC power supply back on.
If the jumper FWH_EN set as “Disable” (pin2 & pin3), the system BIOS is protected
from being attacked by a serious virus, such as the CIH virus. You will be unable to
flash the BIOS to the motherboard when the system BIOS is protected.
3. BIOS-Protection Jumper (optional): FWH_EN
Normal (Default)
Clear CMOS
1
1
CLS_CMOS
1
1
Flash write
Disable
Flash Write
Enable
(Default)
FWH_EN
2. Clear CMOS Jumper: CLS_CMOS