Install windows 7, Install windows 7/8 – Foxconn nT-i2847 User Manual

Page 27

Make sure you have these ready :
1. NETDVD. (It is an optional accessory. If there is no NETDVD in this package, you need other

purchase an external USB DVD-ROM drive.)

2. NanoPC driver. (USB Flash Disk is in this package)
3. Windows 7/8 Install CD. (Other purchase)

Before we continue :
■ Your NanoPC power is off.
■ Connect the NETDVD or USB DVD-ROM drive.

Install Windows 7/8

1. Push power button to turn on your computer, then press key to enter BIOS Setup.
2. Put the Windows 7/8 Install CD into the NETDVD or USB DVD-ROM drive.
3. Select and go to the “BootOptions” menu, set the “1st Boot Device” to “Hard Disk”, press
key to save change and exit BIOS.

4. The computer will reboot, and it will start loading files for installing Windows 7/8 Operating

System.

■

WiFi card with this product doesn't support Vista operating system.

■ Intel CPU 807 & 847 don't support Intel Clear Video HD Technology.

■ Windows 7(32-bit/64-bit) and Windows 8(32-bit) can’t be installed when
“Launch CSM” is set to “Disabled” in the BIOS setup.

BIOS Setup Utility

Main Advanced Power Security BootOptions Save & Exit

BootOptions

Launch CSM

[Enabled]

Launch PXE OpROM policy

[Do not launch]

FIXED BOOT ORDER Priorities

1st Boot Device

[Hard Disk]

2nd Boot Device

[CD&DVD]

3rd Boot Device

[Removable Device]

4th Boot Device

[LAN]

▶

Hard Disk Drive BBS Priorities

[Press Enter]

▶

Optical Disk Drive BBS Priorities

[Press Enter]

▶

Removable Device BBS Priorities

[Press Enter]

▶

NETWORK Device BBS Priorities

[Press Enter]

Quiet Boot

[Disabled]

Boot Menu

[Enabled]

↑ ↓→ ←: Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7:

Load User-defined Defaulta

F8: Save as User-defined

This item controls if CSM will be launched