Foxconn nT-i2847 - Manual (Page 24)

3
19
Save & Exit
► Save Changes and Exit
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to save your changes and exit, select [No] or to return to the menu.
► Discard Changes and Exit
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to exit setup utility without saving your modifications, select [No] or to
return to the menu.
► Save Changes
If you select this option and press , a message will be displayed in the center of the
screen. Select [Yes] to save your changes, select [No] or to return to the menu.
► Discard Changes
If you select this option and press , a message will be displayed in the center of the
screen. Select [Yes] to discard your modifications, select [No] or to return to the menu.
► Load Default Values
Optimal defaults are the best settings of this motherboard.
Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults.
Select and then press to load the defaults. Select and press , it
will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set
cannot be supported by your hardware devices (for example, too many expansion cards were
installed), the system might fail to work.
► Save as User Default Values
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to save the changes done so far as user defaults, select [No] or to return
to the menu.
Version 2.15.1231. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Power Security BootOptions Save & Exit
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default Values
Load User Default Values
↑ ↓→ ←: Move
Enter: Select
+/-: Change Opt
ESC: Exit
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit Setup
F7:
Load User-defined Defaulta
F8: Save as User-defined
Exit system setup after saving
the changes.
Save & Exit