Foxconn AT-5570 - Manual (Page 15)

22
BIOS SETUP
■ Install Windows 7/8
■ Install Drivers
Install OS
Select [Yes] to exit setup utility and reset computer without saving your modifications, select [No] or
to return to the main menu.
► Save Changes
If you select this option and press , a message will be displayed in the center of the screen.
Select [Yes] to save your changes, select [No] or to return to the main menu.
► Discard Changes
If you select this option and press , a message will be displayed in the center of the screen.
Select [Yes] to discard your modifications, select [No] or to return to the main menu.
► Restore Defaults
Optimal defaults are the best settings of this motherboard.
Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults. Select
and then press to load the defaults. Select and press , it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the performances
of system components. But if the optimal performance parameters to be set cannot be supported by
your hardware devices (for example, too many expansion cards were installed), the system might fail
to work.
► Save as User Defaults
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to save the changes done so far as user defaults, select [No] or to return to the
main menu.
► Restore User Defaults
If you select this option and press , a message will be displayed in the screen.
Select [Yes] to restore/load the user defaults to all the setup options, select [No] or to return to
the main menu.
► Boot Override
BIOS auto detect the presence of connected devices, select the device you want to boot from and
press , then the system will directly boot from the selected devices.