Formax FD 8804 - Manual (Page 9)

6
Control Panel
DOOR OPEN
Indicator lights to show
when waste bin door is
open. (Shredder will not
operate if door is open.)
REVERSE
Blue Touch Pad
Push button to reverse
direction of cutting blades.
STOP
Red Touch Pad
Push button to stop
cutting system. Shredder
remains in standby mode
until Start is pressed.
START
Green Touch Pad
Push to start conveyor and cutting
blade operation. Cutting system
operates in feed direction.
Start-up and Operation
Main Switch
1. On the right side of the machine, open the orange door leading to the electrical control panel. Push on the
lever (Fig. 1) and the handle will pop out. Pull to open (Fig. 2).
2. Flip the main power switch to the UP position (Fig. 3).
3. Insert key into On-Off switch to right of control panel (Fig. 4). Turn key right, to the On position.
Fig. 1 Fig. 2 Fig. 3
Main Power Switch
MODE INDICATORS
Indicators light to show the
shredder’s status: Auto,
Manual, Stop, Reverse
WASTE BIN FULL
Indicator lights when
waste bin is full of
paper shreds.
LOAD INDICATOR
Lights to show how
close shredder is
to capacity, or if
overloaded.
Fig. 4