Formax FD 380 - Manual (Page 6)

SETUP
1. Install upper and lower fold plates in position. Be sure
the plates are set fi rmly on the locating pins (Fig 1a &
1b). Slide the fold plate in until it meets the fi rst locating
pin then push down to lock it in position (Fig. 2).
2. Plug the fold plate cables into the receptacles on the
side frame (Fig. 3a & 3b).
3. Make sure the power switch is in the “OFF” position.
4. Plug the power cord into the power inlet and the wall
outlet.
Fig. 1b
Locating Pins Locating Pins Locating Pins Locating Pins
2
Lower Fold Plate Pins
Upper Fold Plate Receptacle Location
Lower Fold Plate Receptacle Location
Plug in Receptacle
Plug in Receptacle
Fig. 3b
Fig. 3a
Fig. 1a
Locating Pins
Fig. 2
Upper Fold Plate Pins