Formax FD 332 - Manual (Page 13)

13
Press the appropriate numerical key to select the
number of forms to be folded.
Example: press the number “10” key twice to select
twenty.
Note:
The batch counting number is cancelled
when the POWER is set to OFF.
Under the following conditions the machine will automatically stop feeding:
(Press the Clear/Reset key to reset after the error has been corrected)
Conditions Indication on Control panel
1. When the Start/Stop key is pressed while there is no stock.
2. When the Start/Stop key is pressed while the paper feed lever is at
the upper position.
3. When the stock runs short while folding in the Batch Counting Mode.
1. When paper feed slip occurs
2. When paper jam occurs at Table 1 and Table 2
1. When paper stack table is full.
2. When paper jam occurs at the paper discharge.
Clearing a Paper Jam:
Numerical Key