Formax FD 320 - Manual (Page 6)

4
UPPER & LOWER FOLD PLATE REMOVAL
Removing upper fold plate:
Using both hands (putting one hand on the front of the fold plate and one on the end of the fold plate)
holding firmly lift end of plate ½” and pull the fold plate back in the same angle. (Fig. 1)
Installing upper fold plate:
Slide fold plate on the top of the upper guide pins and ensure that the lower guide pins are in the slots
of the front of the fold plate pushing in and then down until plate locks into place. (Fig. 2)
Removing lower fold plate:
(fig 3)Holding end of lower fold plate lift then pull back.
Installing lower fold plate:
(fig 4)Place lower fold plate on top of lower support rod, slide fold plate up between the upper support
rod and the bottom of the paper ramp insure that fold plate locks into place.
Fig. 1
Fig. 4 Fig. 3
Fig. 2
Upper guide pins
Lower guide pins
Paper ramp
Upper support rod
Lower support rod